Kit Update

Hi Guys,

We spent the past few weeks working on the price for the Complete Kit, as well resin, software and everything related to the Printer.

We found out that producing all the parts and shipping worldwide is quite expensive, which is not what most of the people expect for a DIY project. The complete Kit would probably cost over 4K USD, without shipment and in case we manage to have a big volume.

This is very cheap compared to existing High Resolution 3D Printers, but it is expensive for a DIY project. And we felt after reading lot of emails commenting on the pricing, that the community is not expecting such a high price.

Because of this, we think would make more sense to move for only a basic kit, where we would provide all documentation needed to build the Printer, as well the Resin formula and just sell the software and the controller board. The documentation would have the detail technical specification, BOM and Suppliers.

This basic kit (Document + Software + Controller Board) would be sold around $600 USD, but even for that we would need a good volume to be able to produce it.
For this reason we’re creating a Pre-order list for both Kits (full and basic), so we can decide the best way to move forward.

If you are interested in the basic one or in the full one or both, please send us an email at veloso3d@gmail.com

Cheers

Quick update

Hi Guys,

It has been a while since my last update, my apologies for that.... I have been quite busy...

Pedro is now leading the project and we have everything ready for the kit, looks impressive. I will post the details this week.

There are many comments and messages of people asking for contact details, so I decided to put our contact here in the blog. If you wish to talk to us please send an email to veloso3d@gmail.com

Cheers,

Jr

Still up and running...

Hi Guys,

Well, still alive... and working hard on the project...

I haven't had time to update the blog or access facebook, believe me... and my apologies for being away for so long.

A lot of people have been asking how to contact me... here is my email... jvelosojunior@gmail.com

Best regards,

Junior

Getting good Macro Pics

Hi Guys,

Really sorry for not posting anything past few weeks, I have been too busy at work.

I will provide more updates about the project + FAQ by the end of this week. Meanwhile I hope you enjoy some new pictures from jewelry.

Regards,

Junior

Better Camera Lens!!!

Hi Guys,

Finally I got a macro lens, still learning how to use it but already got some good pics....

Thanks for all questions, I will answer by next week in the new FAQ.

Cheers,

Jr

New Video - Youtube - Printing Alien Skull

Hi Guys,

We prepared a new video for you... I hope you like it as much we enjoy preparing it.

Follow the updates on twitter: http://twitter.com/#!/jvelosojunior




Link: http://www.youtube.com/watch?v=IPmP0u1HuUM

Cheers,

Junior

FAQ 4

Hi Guys,

Again, thank you very much for the interest in the project and all support. We have been working hard to bring this high resolution 3D Printer to all of you.

Before our FAQ, I would like to share a really nice thing with you. I printed some amazing bracelets (link) that I found through Google and posted here in our blog, however I didn’t know who created it.

I got the comment from him (Jesse Louis-Rosenberg) this week and I am very impressed with their work… check this out… http://n-e-r-v-o-u-s.com/blog/ I hope we can print some more of their work…

FAQ 4:

Q: There are plans to sell worldwide when it's ready?
A: We will be selling everywhere

Q: How much the 3D Printer will cost? (This is the main question we have received)
A: Unfortunately we don’t have the price yet as we are still finishing the design and material needed. We know that will be cheap, really affordable for a hobbyist, designers and home users.

Q: How much cost the resins?
A: The resin cost is quite high at this moment because of the volume, over 350 per litter. We truly believe that this can go down once the volume increases, this means we need big number of people using the technology to have good price for the resin. I hope this happens as soon we bring a low cost printer to the market.

Q: How much cost the software? Can I buy just the software?
A: The software price is still in discussion.

Q: Will the resin be open source?
A: Most probably not, because you can’t find the raw material easily to buy and some countries you will need government license to buy it. However the mixed material can be commercialized as resin. Additionally if we manage to buy together from one vendor we will reduce the price drastically.

Q: I would like to ask though, can you try to print a larger/heavier object (closer to the max theoretical dimensions you mentioned in an earlier post) so we can see what this design is capable of?
A: Answer in FAQ II - http://3dhomemade.blogspot.com/2011/06/thank-you-faq-ii.html

Q: Can you print wax models for jewelry? (Esta impressora serveria para fazer modelos de joias em cera?)
A: Yes, check the previous FAQs.

Q: Any dates for the commercial version available? (Há previsão para comercialização?)
A: We will start the preorder soon via crowd-funding (most probably within 2 months).

Q: From Teagus: would you be willing to run a figure i have modeled as a test?
A: Yes, but we are quite late with these requests as we have been testing the printer. If you don’t mind in waiting few weeks we will be more than happy to print. Please send me a comment with your email address and I will contact you.

Q: What kind of files can it import?
A: All STL files. Any 3D system can export 3D files to this extension also you can convert any 3D file to STL using free applications.

Q: Does the printer software add the necessary support structures automatically?
A: Yes, the software adds the necessary support structures, you don’t need to do it manually.

Q: how possible are moveable parts like ball bearings using the same resin material as a support?
A: Yes, you can print movable parts.

Q: Can the software set the wall thickness of a model? Or is that something that has to be handled while creating the 3d model?
A: Yes, the software will set the wall thickness.

Q: Do you think there might be a way to scale it up so that the same system could be used to create objects of a larger size but with reduced resolution?
A: See previous FAQs. This is possible but some implications.

Q: May I ask how long it took to print the sphere?
A: with 50 micros resolution around 4 hours

Q: very nice, are the resin materials safe for the environment? will they degrade with time, what are they made of?
A: Will answer this one once the material design is finalized.

Q: the last photo: there are tiny scratches on the surface, is there any way to do to achieve a much smoother surface or the resin(lost-wax type) can be modified after?
A: The surface is really smooth, you may not be able to see in the pictures. BTW, none of the objects received any type of finishing.

Sorry if I missed your question, I will answer more next FAQ.

Cheers,

Junior